INSPIRA® Tear-A-Way is a stabilizer that is designed to be used as a backing on stable woven fabrics. During the embroidery process the stabilizer is perforated, making it easy to remove. Very little residue is left around the edges. The stabilizer left under the stitches will eventually wash away.
Sizes available:
Best for these applications:
|
 |
INSPIRA® Tear-A-Way Light is a great backing for light to medium weight stable woven fabrics. It is ideal for use with designs with low density and stitch count, such as outline designs or redwork. The light, crisp nature of this stabilizer makes it very easy to remove and ensures that the stitches will not be distorted when the stabilizer is pulled away. Multiple layers of INSPIRA® Tear-Away Light stabilizer can be used for slightly more dense designs.
Sizes available:
|
 |
INSPIRA® Fast & Easy Tear-A-Way is a temporary stabilizer that can be used as a backing for most woven fabrics. A slightly textured surface helps to grip the fabric and reduce movement during the hooping process. INSPIRA® Fast & Easy Tear-A-Way stabilizer is manufactured from recycled cotton fibers, offering an eco-friendly alternative to traditional tear-a-way products. This stabilizer is very easy to remove and leaves very little fiber residue even when multiple layers are used.
Sizes Available:
|
 |
INSPIRA® Fast & Easy Tear-A-Way Light is a temporary stabilizer that can be used as a backing for most light weight woven fabrics. A slightly textured surface helps to grip the fabric and reduce movement during the hooping process. INSPIRA® Fast & Easy Tear-A-Way Light stabilizer is manufactured from recycled cotton fibers, offering an eco-friendly alternative to traditional tear-a-way products. This stabilizer is very easy to remove and leaves very little fiber residue even when multiple layers are used.
Sizes available:
|
 |
| INSPIRA® Tear N’ Wash is a stabilizer composed of microfibers inside of wash-away paper. The paper dissolves completely in water, but the microfibers stay locked in the design for continuous support. It is a great backing for embroidery on towels, blankets and loosely woven fabrics.
Note: Do not use as a topper or stabilizer for lace, 3D appliqué, Richelieu, or cutwork. Sizes available:
|
 |
INSPIRA® Light & Tacky Tear-A-Way is a removable stabilizer with a revolutionary “paperless” sticky surface. There is no paper covering of the tacky surface, so there is no need for scoring the paper. This stabilizer tears away easily and leaves minimal residue on needles, machine parts and hoops. Use for small items which are not large enough to hoop or for sensitive fabrics that can be marked when hooped such as velvet, satin, suede, soft leather or vinyl. INSPIRA® Light & Tacky Tear-A-Way provides the needed support for fabrics with some stretch.
Sizes available:
Best for these applications:
|
 |
INSPIRA® Fuse N’ Tear is a temporary iron-on tear away stabilizer. It is applied to the back of your fabric prior to hooping to prevent distortion. Provides additional support for embroidery or decorative stitching. INSPIRA® Fuse N’ Tear stabilizer is great for slippery or unstable fabrics as well as light to medium weight wovens. When stitching is complete the excess is easily torn away.
Sizes available:
|
 |
INSPIRA® Light & Soft Fuse-On is a fusible tricot, which provides permanent stability to delicate and hard-to-handle fabrics such as silk dupioni, taffeta, satin and stretchy knits. When applied to the wrong side of the fabric, it will give a firm foundation without affecting feel or hand.
Sizes available:
Best for these applications:
|
 |
INSPIRA® Stick-On is a tear away stabilizer with a sticky surface great for hoop-less embroidery. Use this stabilizer for embroidery on small areas or items that are difficult to hoop such as neck ties, collars, cuffs, pockets, socks and caps.
Sizes available:
Best for these applications:
|
 |
INSPIRA® Clear N’ Melt is a transparent film stabilizer which can be used as a topping or backing. It instantly disappears when touched with the tip of an iron. INSPIRA® Clear N’ Melt will not stick to the iron, ironing board or the embroidered area. It is great for fabrics you do not want to wash. Use as a topping to keep nap or pile from peeking through stitches. For uneven surfaces and coarse weave fabrics, INSPIRA® Clear N’ Melt prevents stitches from sinking. Use as a backing for sheer fabrics.
Sizes available:
|
 |
INSPIRA® Cut-A-Way is a soft, non-woven stabilizer with strong, even consistency that provides permanent stability. This stabilizer is used as a backing and remains in the project to support the design after laundering and wearing. It is ideal for dense embroideries with a large number of stitches. INSPIRA® Cut-A-Way stabilizer is recommended for medium to heavy weight woven fabrics as well as unstable fabrics such as knits, denim, linen and fabrics with an open-weave.
Sizes available:
|
 |
INSPIRA® Fusible “No Show” Mesh is a semi-sheer iron-on polyester stabilizer that is very soft yet strong. It is used as a permanent backing and is ideal for garments and fabrics with stretch as well as applications that will be close to the skin. The translucent nature of this stabilizer eliminates the bulk, stiffness and shadowing characteristic of other types of permanent stabilizers. INSPIRA® Fusible “No Show” Mesh stabilizer is applied to the back of your fabric prior to hooping, preventing distortion during the hooping process. No messy spray adhesives or glues needed!
Sizes available:
|
 |
INSPIRA® Water Works is a light weight water soluble film mainly used as a topper. It is recommended for use with polar fleece, corduroy, terry cloth and other napped fabrics. After embroidery, INSPIRA® Water Works stabilizer is easily removed. It washes away completely in water.
Sizes available:
Best for these applications:
|
 |
INSPIRA® Aqua Magic is a soft fabric-like stabilizer that dissolves completely in water. It provides an ideal foundation for freestanding appliqué, lace-making and cutwork designs during the embroidery process. Because INSPIRA® Aqua Magic stabilizer rinses away completely, it will leave your project soft and pliable, not stiff.
Sizes Available:
|
 |
INSPIRA® Aqua Magic Plus is a fabric-like stabilizer with a thin layer of adhesive that allows you to “stick” your fabric to the stabilizer in the hoop. It is great for small items or fabrics that should not be hooped. Because INSPIRA® Aqua Magic Plus stabilizer rinses away completely, it will leave your project soft and pliable, not stiff.
Sizes available:
|
 |